Open a lot
Define the work area, then separate brush, trees and below-ground work.
What stays: Keeper trees stay. Roots and debris handling must be specified; an open lot is not automatically a building pad.
Read the lot clearing details →Collier County · locality service area
If you own a parcel in Immokalee and the vegetation has gotten ahead of your plans, the first decision is what kind of finish you actually need. Lot clearing, forestry mulching, and brush clearing each leave the ground in a different condition. We scope the work around what stays, how material is handled, and what you plan to do with the property after we leave. Tell us your intended use and we'll put a written estimate together.
Choose the finish, not just the machine
Compare all three below. Choose one to carry that service into your estimate request.
Define the work area, then separate brush, trees and below-ground work.
What stays: Keeper trees stay. Roots and debris handling must be specified; an open lot is not automatically a building pad.
Read the lot clearing details →Grind suitable standing brush and smaller woody growth in place.
What stays: A layer of mulch and the root systems normally remain. Grubbing and haul-off are separate work.
Read the forestry mulching details →Remove selected low growth around marked trees and agreed access lines.
What stays: The chosen canopy stays. Cut material is mulched or collected according to the written scope.
Read the brush clearing details →Not sure? Leave the choice open and describe what you want the ground to look like.
These three services are related but not interchangeable. Lot clearing targets a defined area for full vegetation removal, including trees, with stumps and root treatment quoted separately. Forestry mulching processes standing vegetation above ground and returns it as surface material; roots stay in place. Brush and underbrush clearing addresses overgrown low vegetation, vines, and smaller stems, either by cutting or mulching depending on the finish you need. Knowing your intended land use helps us recommend the right approach before any work begins.
Before we price anything, we need a clear boundary. On a working or agricultural parcel, the cleared area often does not match the full lot. You may want one section opened for access or use while the rest stays as-is. That boundary should reflect your survey markers or a documented line you can show us on-site, not an estimate from memory. Jurisdiction can also matter here: Immokalee parcels sit in Collier County, but mailing addresses alone do not always define which rules apply to a given parcel. Confirm your actual parcel jurisdiction before we start.
As an example only — not a past project or a typical local condition — consider an owner who wants brush cleared along a shared boundary to allow fence installation, plus a broader interior section opened for practical use, while keeping a stand of mature trees intact. That kind of request breaks into at least two separate line items: boundary access work and the wider interior clearing. Each carries different equipment requirements and time, which is why we ask about both before we quote rather than pricing them as a single flat rate.
Compare the three clearing options →Every clearing job should have a "what stays" list. Protected species, trees you intend to keep, natural buffers, and anything near utilities or structures need to be identified before work starts. When we use forestry mulching, processed material remains on the surface; it is not hauled away by default. Cut material from brush clearing may be chipped, piled, or left depending on the agreed scope. We do not silently include hauling, disposal, or material removal in a base quote — those are scoped and priced separately if you need them.
Forestry mulching handles vegetation above the ground line. It does not extract stumps, eliminate root systems, or prepare ground for load-bearing construction. If your plans require stump removal, below-grade root work, or treatment of larger-diameter wood, that is a separate scope item. We will note what we observe during the estimate visit and flag anything that will need additional treatment. Do not assume any clearing method automatically produces graded, compacted, or construction-ready ground — we do not promise that, and it would require a separate process.
Access to the work area affects both method and cost. If equipment needs to cross existing vegetation, a fence line, or a wet seasonal area to reach the clearing zone, we factor that into the scope before we start. On a working property in southwest Florida, conditions can vary by season. We are not making a claim about your specific parcel's soils or drainage — those are questions worth asking before you schedule any ground-disturbing work. What access looks like on your property is part of what we discuss during the estimate visit.
Request a property estimate →Collier County is the governing jurisdiction for most Immokalee parcels, and the county's land use and development resources are a reasonable starting point for understanding what approvals or permits may apply. That resource is a starting point only — it does not confirm parcel-specific requirements, and county rules are not the same as any applicable municipal rules. Separately, if you believe an agricultural exemption applies to your parcel, that determination comes from the appropriate authority, not from us. We scope the clearing work; you confirm the land-use permissions that govern it.
Our pricing page explains how we approach quotes. Forestry mulching projects carry a minimum of $1,200; all other clearing work is quoted individually based on scope. Mobilization, hauling, disposal, stump or root treatment, and any permit fees are not included in a base quote unless we have explicitly listed them in writing. When you request an estimate, tell us the parcel address, the approximate area you want cleared, what you plan to do with it, and whether you have boundary markers or a survey we can reference. That information lets us put together a written scope that reflects actual conditions rather than assumptions.
Local source board
These links are starting points, not a permit decision for a parcel. The owner should confirm jurisdiction and current requirements.
Sources checked October 23, 2026. Verify current requirements before work.
Questions from property owners
Yes. These are different scopes and we quote them separately. Clearing a boundary strip for fence access involves different access, width, and finish requirements than opening a larger interior section. Giving us both as line items means you can approve one, the other, or both, and you know exactly what each part costs before any work begins.
No. Forestry mulching processes standing vegetation above the ground line. Stumps and root systems remain in place. If your planned land use requires stump removal or below-grade root treatment, that is a separate scope item with its own pricing. We will identify visible stumps during the estimate and note what additional work they would require.
Permit requirements depend on your specific parcel, its jurisdiction, and your intended land use. Collier County has land development resources that are a useful starting point, but they do not replace a parcel-specific review. We recommend confirming applicable requirements with the relevant authority before we begin work. We scope the clearing; permit responsibility belongs to the property owner.
The most useful details are your parcel address, an approximate description of the area you want cleared, what you want to keep, your intended use after clearing, and whether you have a survey or marked boundaries. That gives us enough to either quote directly or schedule an on-site visit before we finalize a written scope.
Beyond this location
Start with the location, work area and the result you want. Photos are optional. We will discuss the method and arrange a site walk when needed before a firm scope.
Prefer to call? +1 (813) 295-6187
No sales script. If it is not our kind of job, we will tell you.