Open a lot
Define the work area, then separate brush, trees and below-ground work.
What stays: Keeper trees stay. Roots and debris handling must be specified; an open lot is not automatically a building pad.
Read the lot clearing details →Escambia County · locality service area
Cantonment parcels vary in size, cover and intended use, and the right clearing result depends on what you plan to do with the ground afterward. Florida Land Clearing Co works through the actual condition of your property — what's standing, what stays, and where material goes — before writing a scope. Whether you're reopening ground that's grown back or pushing into a new area for the first time, we start with a site visit and a written estimate, not a guess.
Choose the finish, not just the machine
Compare all three below. Choose one to carry that service into your estimate request.
Define the work area, then separate brush, trees and below-ground work.
What stays: Keeper trees stay. Roots and debris handling must be specified; an open lot is not automatically a building pad.
Read the lot clearing details →Grind suitable standing brush and smaller woody growth in place.
What stays: A layer of mulch and the root systems normally remain. Grubbing and haul-off are separate work.
Read the forestry mulching details →Remove selected low growth around marked trees and agreed access lines.
What stays: The chosen canopy stays. Cut material is mulched or collected according to the written scope.
Read the brush clearing details →Not sure? Leave the choice open and describe what you want the ground to look like.
Reopening land that was cleared before and breaking new ground are not the same job, even when they look similar from the road. Previously cleared areas often have dense regrowth from root systems that were never removed — that material comes back faster and denser than seedling growth on untouched ground. New footprints may have larger stems, heavier canopy and root masses that haven't been disturbed. Understanding which situation you have shapes the equipment approach, the estimated time and what the finished surface will look like.
Lot clearing is the process of removing trees, brush and surface vegetation from a defined parcel boundary so the ground is accessible and workable. The result is cleared ground — not graded, not compacted for construction and not free of root systems below the surface. We define the work boundary with you before we start. Stumps and roots may remain depending on what's scoped. If your intended use requires something beyond surface clearing, that work is identified separately and quoted on its own terms, not silently rolled in.
Forestry mulching grinds suitable above-ground vegetation and leaves the processed material on the surface. It does not extract stumps or remove root systems below grade. The mulched layer can suppress some regrowth and reduce bare-soil exposure, but we don't promise permanent vegetation control or specific depths without seeing the site. This method works well when you want vegetation removed without hauling debris off-property. If larger wood, significant stumps or specific surface conditions are part of your goal, those items are scoped and priced separately.
Compare the three clearing options →Brush and underbrush clearing can be done by cutting, by mulching, or by a combination, depending on the density, stem size and what finish you need. We don't apply one attachment or one method to every situation. Lighter brush on open ground is a different job from thick palmetto and vine cover along a fence line or access path. When you describe your parcel — what's overgrown, how large the area is, and what you're trying to accomplish — we can tell you which approach fits and what each leaves behind.
When vegetation has reclaimed ground that was cleared in the past, the root network is usually already established. Cutting or mulching the regrowth removes what's above the surface, but the roots that drove that regrowth remain. That's not a defect in the work — it's what clearing does. If your goal is to slow regrowth significantly, that may require a follow-up approach or a different scope than a one-time pass. We'll tell you what a single treatment will likely leave behind so your expectations match the actual result, not a best-case picture.
Every scope we write identifies what's inside the treatment area and what we're leaving in place. That includes specific trees you want to keep, buffer areas along property lines, and any features — drainage paths, existing structures, fence lines — that affect where equipment can operate. Protecting something starts with marking it clearly before work begins. If you have a parcel in Cantonment where the boundary isn't surveyed or the lines aren't flagged, we'll ask about that before we write the scope, because clearing to a line we can't see creates problems for everyone.
Request a property estimate →Cantonment is a mailing community in Escambia County, not a separately incorporated city, so parcel-level rules generally fall under county authority rather than a municipal code. That said, your actual parcel's jurisdiction, zoning and any applicable clearing or land-disturbance requirements should be confirmed before work starts. Escambia County's natural resources management page is a starting point for county-level guidance. We don't determine permit requirements for your parcel — confirm those with the applicable authority. See also the Escambia County overview and our Northwest Florida region page.
Our pricing page explains how we approach project costs. For context: forestry mulching carries a project minimum of $1,200; lot clearing, brush clearing, stump work and any hauling or disposal are quoted individually based on your site. Access, acreage, vegetation density, what stays, and how material is handled all affect the final number. As a hypothetical example — if an owner asked us to mulch two overgrown acres of regrowth while preserving a stand of mature pines along the north line, that scope would be written and priced based on a site visit, not a per-acre formula applied remotely.
Local source board
These links are starting points, not a permit decision for a parcel. The owner should confirm jurisdiction and current requirements.
Sources checked October 23, 2026. Verify current requirements before work.
Questions from property owners
Regrowth usually comes from an existing root system, so it returns faster and thicker than first-growth on undisturbed soil. Clearing it removes what's above ground, but those roots stay in place. A new footprint may have larger, older root masses and heavier canopy but no prior disturbance. Both situations are scoped on their own terms after we see the property.
No. Forestry mulching processes above-ground vegetation and leaves root systems and stumps below grade. If stump removal or grinding is part of what you need, that's a separate scope item. We'll identify what mulching will and won't address on your specific parcel during the estimate visit so there are no surprises after the work is done.
Cantonment parcels generally fall under Escambia County authority rather than a city code, but your specific parcel, zoning and intended use determine what applies. We don't make that determination for you. Confirm requirements with Escambia County or the applicable authority before work begins. We're happy to discuss what scope you're considering while you work through that process.
A written scope identifies the treatment area, what's being removed, what stays, how material is handled and what the work does not include — such as below-grade roots or off-property hauling, if those aren't part of the agreement. Knowing what's excluded is as important as knowing what's in. We put that in writing before any work starts.
Beyond this location
Start with the location, work area and the result you want. Photos are optional. We will discuss the method and arrange a site walk when needed before a firm scope.
Prefer to call? +1 (813) 295-6187
No sales script. If it is not our kind of job, we will tell you.