Open a lot
Define the work area, then separate brush, trees and below-ground work.
What stays: Keeper trees stay. Roots and debris handling must be specified; an open lot is not automatically a building pad.
Read the lot clearing details →Lake County · locality service area
Florida Land Clearing Co clears overgrown lots, wooded parcels and tangled brush in the Mount Dora area of Lake County. Whether you need a clean lot, a mulched surface or a passable access line, the finish you want drives how we scope the work. Tell us what you're keeping and what the ground needs to do when we're done, and we'll put that in writing before anything starts.
Choose the finish, not just the machine
Compare all three below. Choose one to carry that service into your estimate request.
Define the work area, then separate brush, trees and below-ground work.
What stays: Keeper trees stay. Roots and debris handling must be specified; an open lot is not automatically a building pad.
Read the lot clearing details →Grind suitable standing brush and smaller woody growth in place.
What stays: A layer of mulch and the root systems normally remain. Grubbing and haul-off are separate work.
Read the forestry mulching details →Remove selected low growth around marked trees and agreed access lines.
What stays: The chosen canopy stays. Cut material is mulched or collected according to the written scope.
Read the brush clearing details →Not sure? Leave the choice open and describe what you want the ground to look like.
Lot clearing, forestry mulching and brush clearing are related services with meaningfully different results. Lot clearing aims for an open, largely bare surface. Forestry mulching processes standing vegetation and spreads the material across the ground, leaving roots in place below. Brush clearing targets overgrown understory while leaving selected trees or structures standing. None of these is automatically the right answer. The useful question is: after we finish, what does the property need to look like and what does it need to support?
Before equipment touches your parcel, we need a clear boundary and a clear list of what stays. Trees you're keeping, fences, outbuildings, utilities, septic access points and neighboring property lines all shape how we set up and move through the site. Ambiguity at the boundary edge is the most common source of scope disagreement. When you reach out, describe or mark what you want protected. That information goes directly into the written scope so there's no guessing once we're on the ground.
Forestry mulching cuts and processes above-ground vegetation in a single pass, leaving a layer of mulched material on the surface. It is not grubbing, and it does not extract stumps or remove root systems. Larger stumps and roots that remain after mulching are a separate scope item. If your intended use requires a bare or graded surface, that distinction matters. We'll tell you what the mulching pass leaves behind so you can decide whether additional stump or root work belongs in your estimate.
Compare the three clearing options →One common request we see on parcels with mature trees or existing improvements is selective clearing: remove the overgrown understory, invasive vine growth or crowded brush while leaving the canopy or specific specimens intact. This requires deliberate equipment positioning and manual work near the drip line of trees you want to protect. The approach differs from open-field clearing, and the scope needs to say so explicitly. A hypothetical example: an owner keeps three large oaks along a rear property line while clearing the mid-story brush between them and a planned driveway route.
Access and treatment area are two different things, and confusing them in the scope description leads to mismatched expectations. An access line gets equipment or foot traffic through the parcel. A full treatment area gets cleared to a defined finish. Some projects need both; some need only one. When you describe your property, try to separate the path you need to reach something from the area you actually want cleared. Photos or a rough sketch that labels these zones separately help us write a more accurate estimate and avoid scope creep.
How cut material is handled depends on the method and what you've requested. Forestry mulching leaves processed material on the surface. Lot clearing may involve chipping, piling or haul-off, each of which affects cost and timeline differently. Haul-off and disposal are not silently included in a base quote. If you need the surface clean of debris, say so when you reach out. Larger wood, stumps and root masses that survive the primary clearing pass are noted in the scope and quoted separately if removal or grinding is needed.
Request a property estimate →Land in the Mount Dora area falls under Lake County jurisdiction on some parcels and under city limits on others. A mailing address alone doesn't confirm which rules apply to your property. Lake County publishes tree removal guidance as a starting point, but the applicable process depends on your parcel and current regulations, which you should confirm before work begins. We don't interpret permit requirements for you, but we can tell you what the scope calls for so you know what questions to ask the relevant authority.
Clearing cost depends on parcel size, vegetation density, what stays, how material is handled and site access conditions. Our forestry mulching projects carry a minimum of $1,200; lot clearing, brush clearing and other work are quoted individually. Mobilization, hauling, disposal, stump treatment and any permit fees are not rolled into a base rate unless the written scope says so. See our pricing page for general guidance, then contact us with your parcel details so we can put an accurate written scope together for your specific property. See also our central Florida service area.
Local source board
These links are starting points, not a permit decision for a parcel. The owner should confirm jurisdiction and current requirements.
Sources checked October 23, 2026. Verify current requirements before work.
Questions from property owners
A photo showing the path you need cleared to reach something, labeled separately from the area you want treated, is more useful than a wide shot of the whole parcel. If photos aren't practical, describe each zone in plain terms: where it starts, what it ends at and what the ground needs to do when we're finished with each part.
No. Forestry mulching processes above-ground vegetation and leaves a mulched layer on the surface. Root systems and stumps generally remain in place below grade. If your project requires stump removal or root extraction, that is scoped and priced separately. We'll identify what the mulching pass leaves behind so you can decide what additional work, if any, belongs in your estimate.
Mark them on your property if you can, and describe their location relative to a fixed point like a fence line, building or road edge. Photos taken from the tree toward the clearing area also help. The written scope will name or describe the protected trees and note any buffer we're working around, so both sides agree before equipment arrives.
Not automatically. Debris handling, haul-off and disposal are separate line items. If you need the surface cleared of material after cutting or mulching, tell us that when you request the estimate. We'll include it in the written scope with its own cost rather than building it into a rate that may not reflect your actual situation.
Beyond this location
Start with the location, work area and the result you want. Photos are optional. We will discuss the method and arrange a site walk when needed before a firm scope.
Prefer to call? +1 (813) 295-6187
No sales script. If it is not our kind of job, we will tell you.