Open a lot
Define the work area, then separate brush, trees and below-ground work.
What stays: Keeper trees stay. Roots and debris handling must be specified; an open lot is not automatically a building pad.
Read the lot clearing details →Martin County · locality service area
Land Clearing in Stuart, FL — Florida Land Clearing Co
We clear land, lots and brush on parcels throughout the Stuart area in Martin County. Every property has a different intended finish: bare ground for development, a mulched surface that holds soil, or an opened canopy with low growth removed. Tell us what you're trying to accomplish on your parcel and we'll put together a written scope that reflects that goal, not a generic package.
KEEP / CLEAR / FINISHStuart · Martin County. Mark what stays. Define the finish.
Choose the finish, not just the machine
What do you want to clear?
Compare all three below. Choose one to carry that service into your estimate request.
Mulch the growth
Grind suitable standing brush and smaller woody growth in place.
What stays: A layer of mulch and the root systems normally remain. Grubbing and haul-off are separate work.
Read the forestry mulching details →Keep trees, clear below
Remove selected low growth around marked trees and agreed access lines.
What stays: The chosen canopy stays. Cut material is mulched or collected according to the written scope.
Read the brush clearing details →Not sure? Leave the choice open and describe what you want the ground to look like.
01
Your Parcel's Jurisdiction Comes First
Stuart mailing addresses span both Martin County unincorporated land and the City of Stuart's municipal limits. Those two jurisdictions can carry different clearing requirements, and your parcel's actual boundary determines which authority applies. Martin County maintains a land-clearing resource at martin.fl.us as a starting point, but we treat it as a reference, not a parcel-specific answer. Before any scope is finalized, confirm which government has jurisdiction over your specific lot. We will not assume that a mailing address settles that question.
02
Lot Clearing and What the Finish Looks Like
Lot clearing typically means removing trees, shrubs and surface vegetation across a defined boundary so the ground is substantially open. The result depends heavily on what you specify should stay: a heritage tree, a buffer along a fence line, or existing drainage features. Roots and stumps are generally not included in a standard clearing pass; those are scoped separately. If your intended use requires a different ground condition, say so at the estimate stage so we can scope for it accurately and avoid misaligned expectations at the end of the job.
03
Forestry Mulching: Surface Result, Not Soil Work
Forestry mulching grinds suitable above-ground vegetation and returns the processed material to the surface as mulch. It does not extract stumps, remove root systems or prepare load-bearing ground. What it does well is open a heavily vegetated parcel without hauling material off-site, which can reduce cost on the right property. The mulch layer that remains can stabilize exposed soil on a cleared parcel, but it also changes the surface texture. If your planned use requires a clean, material-free surface, a different finish or a removal step will need to be in the scope.
Compare the three clearing options →04
Brush Clearing and Underbrush Removal
Brush clearing and underbrush removal address low growth, vine cover and woody scrub rather than full canopy trees. The method — cutting equipment, mulching equipment or a combination — depends on the density of material and the finish you want. We do not assign a universal price rank or attachment type to brush work before we've seen the parcel. Some overgrown lots in the Stuart area have dense palmettos and vine regrowth mixed with taller stems; the appropriate approach becomes clear during the site review, not before it.
05
Retaining Mulch Versus Removing Material
One of the most consequential choices in a clearing project is whether processed material stays on the ground or is hauled away. Retaining surface mulch from a forestry mulching pass adds no hauling cost and can benefit bare soil between uses. Removal is a separate scope item with its own logistics and pricing. These are not interchangeable add-ons; they change how the job is planned from the start. If you are undecided when we first talk, tell us both scenarios and we will write a scope that shows each option clearly so you can decide before work begins.
06
A Hypothetical Scope Example
The following is an example only, not a past project or a typical Stuart parcel condition. Imagine a roughly two-acre lot with mixed palmettos, scattered mid-size trees and vine regrowth throughout. The owner wants vehicle access across the parcel and a mulched surface but no hauling. A scope for that request might include forestry mulching of the vegetated area within a defined boundary, identification of trees the owner wants retained, and a separate line item for any large-wood treatment if stems exceed what the mulching pass handles. Roots would remain in place. Stump work would be quoted separately if needed.
Request a property estimate →07
Access, Work Boundary and What Stays
A clearing scope is defined by a work boundary, not just a property line. We need to know where equipment will enter, what neighboring features sit at the edge of the parcel, and what the owner specifically wants retained. Trees, structures, drainage swales and adjacent vegetation can all affect where and how we work. Access conditions — gate width, soft ground, overhead lines — are part of the site review, not assumptions we make in advance. When those details are unclear at estimate time, we ask rather than guess, because discovering them mid-job changes cost and timeline for everyone.
08
Pricing, the Written Scope and What Is Not Included
Our forestry mulching project minimum is $1,200; other clearing services are quoted individually. Mobilization, material hauling, disposal fees, root and stump work, grading and permit costs are not silently included in any quote — they appear as line items when applicable. We serve the southeast Florida region including Martin County. To get a written estimate, describe your parcel, its location, your intended finish and any access constraints. That starting information lets us give you a scope that reflects your actual job rather than an average one.
Local source board
Checks before the machine moves
These links are starting points, not a permit decision for a parcel. The owner should confirm jurisdiction and current requirements.
Sources checked October 23, 2026. Verify current requirements before work.
Questions from property owners
Clear answers before a clearing contract
What if my intended finish changes after our first conversation?+
Scope changes happen, and it is far better to catch them before work begins than after. If your desired finish shifts — for example, from retaining surface mulch to full material removal — tell us before we mobilize. We revise the written scope to reflect the new request. Changes made after work starts may carry additional cost or require a separate visit depending on what has already been completed.
Does forestry mulching take care of stumps?+
No. Forestry mulching processes above-ground vegetation and leaves root systems in place. Stumps and larger root masses are a separate scope item. If your project requires stump treatment, flag that at the estimate stage so we can price it correctly. Do not assume mulching includes below-ground work; that assumption leads to scope gaps and unexpected costs after the mulching pass is done.
Does my Stuart-area address automatically mean Martin County rules apply?+
Not necessarily. A Stuart mailing address may fall inside the City of Stuart's municipal limits or in unincorporated Martin County, and each can have different requirements. Your parcel's actual jurisdiction controls which rules apply. We treat the county's published resources as a starting point, not a parcel-specific determination. Confirm your jurisdiction before relying on any general county guidance for your specific property.
What information do I need to get a clearing estimate?+
Give us your parcel location, an approximate size, your intended finish — mulched surface, open cleared ground, brush-only removal — and any access details like gate size or wet areas. Note any trees or features you want kept. You do not need survey documents to start a conversation, but the more specific you are, the more accurate the written scope we return to you.
Beyond this location
Wider county and regional coverage
Martin County →Southeast Florida →Property → scope discussion → written estimate
Tell us what needs clearing.
Start with the location, work area and the result you want. Photos are optional. We will discuss the method and arrange a site walk when needed before a firm scope.
Prefer to call? +1 (813) 295-6187
1. Property2. Scope3. Call preference
No sales script. If it is not our kind of job, we will tell you.