Open a lot
Define the work area, then separate brush, trees and below-ground work.
What stays: Keeper trees stay. Roots and debris handling must be specified; an open lot is not automatically a building pad.
Read the lot clearing details →Orange County · city service area
Orlando land clearing that leaves the keep list standing
If a wooded Orlando lot needs opening, removing everything is not the only possible scope. Florida Land Clearing Co can discuss lot clearing, mulching suitable growth or clearing the brush beneath trees you want to keep. We begin with your next use of the property and the limits of the work. A defined opening for construction needs a different finish from a shaded yard or an inspection path. We explain those differences before selecting equipment or presenting an acre-based planning range.
KEEP / CLEAR / FINISHOrlando · Orange County. Mark what stays. Define the finish.
Choose the finish, not just the machine
What do you want to clear?
Compare all three below. Choose one to carry that service into your estimate request.
Mulch the growth
Grind suitable standing brush and smaller woody growth in place.
What stays: A layer of mulch and the root systems normally remain. Grubbing and haul-off are separate work.
Read the forestry mulching details →Keep trees, clear below
Remove selected low growth around marked trees and agreed access lines.
What stays: The chosen canopy stays. Cut material is mulched or collected according to the written scope.
Read the brush clearing details →Not sure? Leave the choice open and describe what you want the ground to look like.
01
Check the city boundary before following city guidance
Orlando's official tree-removal page includes a Check Your Address step and says the property must be within city limits for that city process. That is a useful first distinction for an owner with an Orlando mailing address. Confirm the parcel jurisdiction rather than choosing an application only because the address includes the city name.
The city page explains its tree-removal and encroachment process; it is not a blanket approval for vegetation work. Describe the trees, clearing limits and connection to planned construction when asking for guidance. We do not decide whether an exemption applies from a photograph or treat a city application as a substitute for other required environmental review. The wider Orange County page addresses county coverage, not an alternative city office.
02
Mark the useful trees before opening the understory
A keep list should identify more than the largest trunks. Consider the screen beside a neighbor, shade near an existing building and any trees the final layout is intended to retain. Mark clear work limits and discuss equipment movement around those areas. A contractor cannot reliably preserve an unmarked group that looks like part of the surrounding overgrowth.
Where tree condition, roots or protection zones require professional advice, arrange that before the clearing sequence is fixed. We also need to know about irrigation, service lines, old fences and buried structures. Clearing the brush may reveal obstacles, but it should not be the first method used to discover a known utility. Tell us what has already been identified and what remains uncertain.
03
Match the service to what should remain
Lot clearing is a defined opening with agreed treatment of vegetation and debris. It can range from a selective first stage to more involved removal within a planned work area. Forestry mulching processes suitable brush and woody growth into a surface layer, normally leaving roots. It is not the same thing as removing all organic material from a future pad.
Brush clearing targets lower vegetation around the retained canopy. It can help recover visibility and usable space without prescribing complete removal. A property may use brush work around the edge and a different treatment inside a construction footprint. We explain each zone separately and link to the full method pages rather than copying their entire equipment discussions into this local page.
Compare the three clearing options →04
The spaces between improvements matter
Existing structures, fences and trees can restrict the route even where the entrance itself is wide. Provide the narrowest usable gap, the turn into the lot and the area available for unloading. We need space for support vehicles and material handling, not just enough room for a loader to squeeze through. The access plan should also respect any shared-drive arrangements.
Debris handling can consume that same limited space. If logs must be loaded out, identify where a truck can operate without crossing retained landscape or blocking an agreed route. If a pile stays, locate it away from the next construction stage. We may need to walk the site before confirming a setup where those activities compete for the same small area.
05
Do not hide root work inside the word clearing
An owner who wants a more open yard may accept roots beneath mulch. A builder preparing a footprint may not. Identify the area that needs extraction and get the required finish from the following contractor. Cut-low, ground and pulled stumps are different outcomes. We put the agreed treatment into the proposal rather than letting an attractive surface imply more work than was done.
Larger wood, root balls and unsuitable waste also need separate decisions. Mulched material generally stays where it is processed. Haul-off requires a loading route, transport and disposal allowance. We do not assume burning or burying as a cheap way to make debris disappear. Unknown dumped material can interrupt the planned sequence and should be handled as an explicit scope change.
06
Price follows the working conditions, not the city label
Our forestry mulching project minimum is $1,200. The calculator offers a planning range for suitable mulching inputs; it does not include grubbing, grading, trucking, disposal, permits or mobilization. A detailed lot-clearing proposal may include some of those separately. The minimum must not be read as a complete construction-preparation price.
Selective passes around trees, restricted movement and repeated handling can increase the time needed for a smaller area. Describe density and stem size as well as acreage. Scheduling depends on the confirmed scope, approvals, access and ground conditions. We will discuss a workable sequence rather than promise a start date or a universal daily production figure from the information on this page.
Request a property estimate →07
A selective opening example for a wooded property
Consider a property where the owner wants the understory opened but has not finalized an addition. An early scope might retain a marked group of trees, clear a walking route and mulch suitable growth outside the possible footprint. A later decision could then define tree and root removal inside the actual construction limits. The important detail is keeping those stages distinct.
Before agreeing similar work, compare the retained-tree plan with the access needed for the addition. A useful shade group should not become the unavoidable staging area later. Record which areas receive only surface treatment and which decisions are deliberately left for the final building layout.
08
Tell us the plan, even if it is still a rough one
Submit the property location, approximate work area and what you want kept or removed. Mention any builder involvement, access limitation or known soft area. Photographs are optional when beginning the discussion; they can help later if the crew needs to understand density or a tight entrance. The form keeps the selected service and Orange County context without filling in a property address for you.
The next step is a conversation about scope, followed by an on-site walk where necessary. The written proposal should state limits, equipment, root treatment, debris handling and exclusions. Confirm relevant approvals before booking the work. If the plan changes, update the proposal before the operator starts cutting an additional area.
Local source board
Checks before the machine moves
These links are starting points, not a permit decision for a parcel. The owner should confirm jurisdiction and current requirements.
Sources checked October 23, 2026. Verify current requirements before work.
Questions from property owners
Clear answers before a clearing contract
Does an Orlando mailing address establish city permitting?+
No. Use the city's address-check resource and identify the parcel's actual jurisdiction. Properties described with the same mailing city may follow a different local process. Start with that check before applying tree guidance to the proposed clearing work.
Can you open the understory without removing my shade trees?+
Selective brush clearing can be discussed with marked retained trees and workable equipment access. Agree protection needs, low limbs and material staging as well as the cutting limits. An arborist may be needed where tree condition or protection requirements are uncertain.
Can I leave mulch where an addition might go later?+
You can discuss a staged approach, but mulch is not confirmation that the future footprint is prepared. The eventual building area may need removal of roots and organic material. Coordinate the finish with the builder before treating an early opening as construction preparation.
Can the machine enter without removing an existing fence?+
That depends on the usable opening, turn and equipment required. Supply the narrowest clearance and explain the route past structures and trees. Do not remove a fence on an assumption; confirm the proposed setup and any required access changes before booking transport.
Beyond this location
Wider county and regional coverage
Orange County →Central Florida →Property → scope discussion → written estimate
Tell us what needs clearing.
Start with the location, work area and the result you want. Photos are optional. We will discuss the method and arrange a site walk when needed before a firm scope.
Prefer to call? +1 (813) 295-6187
1. Property2. Scope3. Call preference
No sales script. If it is not our kind of job, we will tell you.